how to make slime without borax in uae

The slime is a disgusting stick that feels cold and disgusting when touched.In other words, it’s creepy enough to charm kids. You can buy it at the store, but you can save money if you do it at home. While borax is the typical choice to do so, an alternative is to use corn starch to make a deliciously nasty and not quite toxic slime that will look great on your children’s Halloween party for a school activity Or to entertain the kids on a rainy or dull day. 

Method 1: How to make traditional slime ?

Traditional slime Ingredients:

  • A whole container of white glue
  • Contact solution
  • Dishwashing liquid soap
  • Eye shadow (optional)
  • Lotion (optional)

The Procedure:

First, mix a large amount of contact solution with the glue and stir thoroughly. Then pour a little liquid dish soap and stir the solution a little until it starts to form lumps. Now pull it out and start playing with it.

It will have a very sticky consistency, but then it will settle and look like rubber. If you want to add color, include some food coloring or eye shadow in the mix. Apply a lotion to give it a greater elasticity.

Method 2: How to make Cornstarch Slime ?

Basic Cornstarch slime ingredients:

  • 1½ cups (350 ml) of water
  • 3 to 4 drops of food coloring
  • 2 cups of starch or corn starch (cornstarch)

The making procedure:

  1. Add 1½ cups (350 ml) of water in a small saucepan. Warm it until the water warms up without becoming hot or boiling. If it is very hot, you have to wait for it to warm up to get your hands in and mix the slime.
    • You can also pour the water into a microwave-safe container and heat it for 45 minutes.
  2. Pour 1 cup (250 ml) of warm water into a basin. Add 3 or 4 drops of green food coloring until the water turns a darker green color than the one you want for the slime. When you make it, the color will lighten a little. Mix intensely with a spoon.
  3. Measure 2 cups (300 g) starch, corn starch or cornstarch. Put them in a basin.
  4. Empty the dyed water in the basin containing the corn starch. Pour the colored water slowly. Use your fingers to mix the ingredients. Mix the ingredients thoroughly until they form a dense paste.
  5. Controls the consistency of the slime. If it is very liquid, you can add starch; If it is too dense, you can add more warm water. It all depends on your preferences.
    • Continue regulating the mixture until you get the slime of the consistency you want. Your fingers are supposed to enter the mix easily. When you slide your fingers on the surface, you should feel dry.
  6. Add optional items to make it more fun.You can put rubber worms, plastic insects or eye sockets, etc. It is excellent for a Halloween celebration, a science fair, a party or an environmental or nature camp.
  7. Put the slime in a plastic bag and close it to preserve it.

Method 3: How to make Edible slime ?

Edible slime ingredients:

  • 1 can (14 oz) condensed sweetened milk
  • 1 tablespoon (15 g) of corn starch (cornstarch)
  • 10 to 15 drops of food coloring

The Procedure:

  1. Pour the sugar condensed milk in a saucepan. You can also use a pot.
  2. Add 1 teaspoon (15 g) of corn starch to sweetened condensed milk. Gradually set the temperature low and simmer constantly.
  3. Remove the mixture from the heat when it has thickened. Add food coloring. Add the one you need to get the color you want.
  4. Let the slime cool down. As soon as it cools down you can play with it (or eat it).Keep in mind that you may stain clothes or light carpets.
  5. Ready.

Method 4: How to make Baby powder slime ?

Slim baby powder ingredients:

  • 1/2 cup PVA glue (multipurpose)
  • Food coloring
  • 1/2 cup of baby powder

The making procedure:

  1. Pour ½ cup of glue or vinyl adhesive into a bowl.
  2. Add 1 or 2 drops of food coloring.
  3. Mix well to combine and distribute the color evenly.
  4. Add ½ cup of baby powder. Add more if necessary, until a viscous consistency.
  5. Play with the slime. Store in an airtight container.

Method 5: How to make Fiber Slime ?

Fiber powder slime ingredients:

  • Water
  • Food coloring (optional)
  • 1 teaspoon (5 ml) of powdered fiber
  • 1 cup (250 ml) of water

The procedure:

  1. Mix 1 teaspoon of powdered fiber with 1 cup of water. Be sure to do so in a microwave-safe container, where you will put it later.
  2. Add a few drops of food coloring until the water and the fiber mixture are the color you want. This will be the color of your slime. It will not be decreased later. Stir thoroughly.
  3. Put the mixture in the microwave container inside the microwave oven. Warm it up for five minutes. Check the mixture periodically to make sure it does not boil so it will not overflow.
  4. Allow the mixture to stand for 2 to 4 minutes, after which time the mixture will be relatively fresh.
  5. Repeat the process of heating and cooling 2 to 6 times. The more you repeat this process, the thicker the mixture will be.
  6. Let the slime cool in the microwave. Let it set for approximately 10 minutes. Be careful not to handle it before it is completely cold as it will be very hot. 
    • You can place the slime in a tray or a cutting board to cool it.

Useful Tips

  • Doing slime can be a dirty activity. Put on old clothes and remember to cover surfaces that can be damaged if they are splashed or stained with the slime.
  • Do not let it fall on the clothes, because it can stain.
  • As an alternative to food coloring, you can temper the starch before pouring water. 


  • Although the basic slime of corn starch and fiber slurry are made without borax, it supervises and prevents children from tasting or eating it because it is not edible. For children it can be a choking hazard and suffocation. However, if a child eats and does not drown, the slime will pass by without consequences (does not apply to edible slime). 

Things You’ll Need

  • sauceboat
  • Bowl or cuezo
  • spoon
  • Large microwave-safe container
  • microwave oven

How to Make Green Slime ?

Kids love limo! It’s fun, sticky, slimy and it messes a lot. The following instructions are for making green slime, the most common and preferred color.

Steps and procedure:

  1. Prepare a “standard solution” using flour. Add the borax to a 1-liter (1-quart) flask filled with water until the borax does not dissolve further.
  2. Mix water and glue until a cohesive and watery solution is achieved.
  3. Add green food coloring to the water mixture and glue. Or you can add the colorant in small pieces or slices of slime while incorporating the solution of glue to the borax solution.
  4. Stir the borax solution into the watery glue and observe how the silt is taking shape.
  5. Finished.

Useful Tips

  • The recipe can be changed by varying the percentage of ingredients used. For example, if two parts of borax solution are used, the slime that forms is “harder” and not so viscous.
  • School glue is suitable for this recipe. It is generally known as “poly” (polyvinyl acetate).
  • The “limo” is best enjoyed on the day of its creation. The silt will collect foam, dust and particles that will make it a nuisance to keep for longer.However, if you want to store it, tag it to avoid any confusion and store it in a cool place, such as the refrigerator or freezer (see “Warnings”). 


  • Borax is poisonous if swallowed. Do not eat it and do not let the children do it. Please follow the instructions responsibly.
  • The glue should not be eaten or inhaled. 

Things You’ll Need

  • Glue (the school is better)
  • Water
  • Borax solution
  • Green food coloring (or any other color you want)
  • A bag, preferably plastic and transparent.
You Might Also be Interested In:

1200+ Ways to Make Money Online in 2017


Please enter your comment!
Please enter your name here